Mavericks Server Part 4: Network Configuration

mzi.ccpnxdwb.175x175-75
One of the more important things you need to do in order to set up a functional server is to make sure your network is properly configured so your Server can do the things it was meant to do. Part of that network configuration is making sure your Server has a set IP address so you can set all of the computers on your network to get their DNS needs met through your Server so there are no conflicts. Depending on what type of system you are running will determine how you set up your network.

In this screencast I show you how to set up a network using an Airport Extreme Base Station (AEBS) where I am allowing the AEBS to handle the DHCP or addressing of all the devices on my network and it also handles the NAT or port forwarding duties as well. In this set up you make sure your AEBS is giving your server a reserved IP address and is pointing to your Server for internal DNS. In other set ups you may have your Server handling DHCP duties as well or if you have a front facing server you might not even have a router so you will be locking down your server with a software firewall that can also be configured to handle NAT if you choose to set it up that way. That set up is beyond the scope of this screencast but I may do one in the future to show how it works.

As always if you have any questions or comments feel free to leave them below or on my
YouTube Channel.



blog comments powered by Disqus